Tube Cutting System

RTH Long

The tube to be cut is fed by the operator through the sheering tool onto the mandrel bar and pushed back against the length stop. A micro switch in the length stop is activated and the tube is cut. This process can be repeated continuously.

RTH Short

The tube to be cut is inserted into the shearing hole and over the mandrel bar until contact is made with the length stop. After the cutting operation, the mandrel together with the length stop is pulled out of the shear bushing. Once the cut off piece is outside the tool, it is stripped off from the mandrel by means of a top sleeve.

SPECIFICATION	UNIT	RTH2L	RTH3L
Diameter of Tubes	inch	0.59 - 1.6	0.59 - 2.6
Wall Thickness	%	Max 7.5% of tube diameter	Max 7.5% of tube diameter
Tube	Quality	Steamless or finn controlled (scraped)	Steamless or finn controlled (scraped)
Tensile Strength	n/inch	31.5	31.5
Max Tube Start Length	inch	118	118
Power	kW	1.5	4
Shearing Capacity	Strokes/H	1500	1500
Machine Variants		Long	Long
Max. Cut Length	inch	2.76 - 19.7	2.76 - 19.7
Working Height	inch	51	57
L x W x H	inch	167 x 295 x 51	167 x 39.4 x 57