Tube End Forming

The TM 70 end forming machine is a basic machine for expanding and reducing tube by the use of segmented tooling. Tubing up to 76.2mm diameter is expanded using segmented fingers and a mandrel inside the tube, or reduced using segmented jaws forced through a fixed cone on the outside of the tube.

The segmented tooling is standard drop in type used by leading tube end formers globally.

Standard Features

Allen-Bradley PLC control
Foot pedal cycle start
Air heat exchange
100mm ram stroke

Options

Tooling

SPECIFICATION	UNIT	TM 70
Max Round Tube Mild Steel	inch	3 x 0.08
Max Forming Length	inch	2.36
Cycle Time Per Form	Sec	4
Working Height	inch	37.40
Hydraulic Motor	HP	10
Total Power	HP	10
Hydraulic Pressure	PSI	1500
Hydraulic Tank Capacity	Gallon	50
Machine Length	inch	55.91
Machine Width	inch	25.59
Machine Height	inch	78.74
Machine Weight	Lbs	2646

SPECIFICATION	UNIT	TME 40	TME 40-2	TME 40-3	TME 60	TME 60-2
Max Round Tube Mild Steel	inch	1.6 x 0.06	1.6 x 0.06	1.6 x 0.17	2.4 x 0.06	2.4 x 0.06
Max Forming Length	inch	4.3	3.9	3.9	4.7	4.3
Cycle Time Per Form	Sec	6	6	6	7	7
Working Height	inch	41.3	41.3	41.3	41.3	41.3
Hydraulic Motor	HP	5.36	7.38	7.38	7.38	7.38
Total Power	HP	5.36	7.38	7.38	7.38	7.38
Hydraulic Pressure	PSI	1740	1740	1740	1740	1740
Hydraulic Tank Capacity	Gallon	63	63	63	63	63
Machine Length	inch	46.5	46.5	46.5	54.3	54.3
Machine Width	inch	46.5	46.5	46.5	49.2	49.2
Machine Height	inch	55	55	55	57	57
Machine Weight	Lbs	882	1874	2205	1147	2205